Jobs Gallery – EVCI

e-Box Charger Installation Cape Town
Set up for two 7kW chargers using a manual change-over switch to select charger 1 or charger 2 (32 amps)
Set-up for two 7kW wall boxes with a Change-Over Switch (Charger 1 or Charger 2)
Level 1 (stage 1) Airbnb
Wall Charger Isolation and Type A ELU point
Full Electric Small Car - Changan Lunim
AI Generated Branding – Changan Lumin Full Electric
Inside a GridCars 7-22kW Charger Wall Box
An Inside Look – Charger Wall Box
Rough Sketch – Sectional Title Multi-Charger Setup
Type 2 Charging Cable and Sockets
Type 2 EVSE Charge Cable
EV Charger Install Cable Run
Warehouse Charger Run
Can I install an EV charger wall box outside?

Yes. Most EVs and PHEVs come with a bundled wallbox charger, and these units are designed for outdoor installation provided they are weather‑rated (IP54 or higher) and mounted securely. It’s good practice to have a charger canopy installed for extra protection. Illustration below …
Ilustration of a weather proof canopy over the EV Charger (AI Generated)

How long does it take to install an EV Charger at home?

From EVCI.tech’s experience, a typical installation takes around 5–7 hours. The cable run from the distribution board (DB) to the wallbox often accounts for 60–70% of the total time. Unless the charger is mounted directly next to the electrical board, you should expect a full day’s work for a compliant, neat installation.

Can my house supply enough power for an EV charger?

It depends — but usually yes, for a typical home with one geyser, oven, and washing machine. At EVCI.tech, we use a clamp meter to measure your household load during morning, afternoon, and evening periods. This assessment determines the best way to introduce a charger safely. If supply is tight, there are several mitigation options: reducing the charger output from 7 kW to 3.6 kW, or temporarily dropping the geyser load while charging. With minor lifestyle adjustments, most homes can comfortably support an EV charger installation.